Mobile+Units

Directions for using the Mobile Unit Please note! Mobile Units must first be booked on SchoolSoft! //Also, please make sure that if you booked Mobile Unit 1-you take Mobile Unit 1 //  __**Step 1**__: Place the unit in its approximate location for the presentation. This may require slight rearrangement of the desks in the classroom. Generally, it should be placed near the middle of the classroom. __**Step 3**__: Plug the 3 power cords from the PC, PROJECTOR, and SPEAKERS into the extension cord outlets.
 * __Step 2:__** Unroll the extension cord so that it is plugged into the wall outlet and the 4 extension outlets are next to the mobile unit. It is important to do this first because once you plug in the cords from the mobile unit you will not be able to unroll the extension cord.
 * __Step 4:__** Check that all power cables are connected to the computer, projector and speakers. Check to see the speakers are ON. *Push the small button on one of the small speakers. A small green light appears.
 * __Step 5__**: Turn on the projector. Make sure the lens cap is off. Depending on the model you have, you may have to press the on button one or two times.
 * __Step 6:__** Turn on the PC.
 * __Step 7:__** Log in using the “Mobile Unit” account. The password is: IESEnskede
 * __Step 8:__** When done with the presentation, it is important that you follow the shutdown procedure shown below.

__Shutting down at the end of a presentation__ **__Step 1:__** Remove the DVD or USB memory stick: USB – Do not simply pull the memory stick out! A USB stick may be damaged if you do not safely remove it. Instructions can be found below these shutdown procedures
 * __Step 2:__** Turn off the speakers if they were used. The power button is on one of the two small speakers.
 * __Step 3:__** Shut down the computer-Do not just log off! This must be done before you shut down the projector because once you turn off the projector, you will no longer be able to see your Windows desktop.
 * __Step4:__** Turn off the projector. DO NOT UNPLUG THE PROJECTOR YET! Because of the heat generated by the lamp inside the projector, the fan needs to continue running for two or three minutes to help cool down the inside of the projector. This is very important. __Only unplug the power cord after the fan has stopped running.__
 * __Step 5:__** Unplug the three power cords from the extension cord and place them **neatly** over the top of the cart.
 * __Step 6:__** Roll up the extension cord and place it on top of the cart.
 * __Step 7:__** Please return the cart to Mr. Hitchcock’s office (Middle School) or server room (Junior School) immediately after your booked time has ended.

 Safely removing a USB stick:

And Voila!

Benq projector user manual